Model: is-130Z

  • High quality 1/4" ccd IMAGE SENSOR
  • 30 time optical zoom in & zoom out
  • hIGH RESOLUTION 480tvl
  • bUILT-IN SMART TEMPERATURE SENSOR WITH HEATER
  • BUILT-IN MULTI-VOLTAGE CONVERTER (INPUT POWER 8vac~26vac / 8vdc~36vdc)
  • wORKING LOW LIGHT LESS THAN 0.1lUX F2.0
  • Durable and Reliable


IS-130Z Explosion Camera


IS-130z 30X zoom Explosion-proof Camera for hazardous locations

TMI shows innovation and advanced technology in their explosion-proof camera system for safe and efficient installation in hazardous locations. Featuring a high resolution CCD camera with 30 time optical zoom, smart temperature sensor, built-in heater, and multi-voltage converter (input power 8VAC ~26VAC & 8VDC~36VDC), IS-130Z provides the sharp image quality, working in extreme weather condition, and reliability you demand in the most challenging environments.



application ideas
  • Oil & gas drilling rigs
  • Petroleum processing facilities
  • Chemical Factories
  • Munitions storages
  • Agricultural processing Plants
  • Oil & Gas plants
  • Oil & Gas Pipelines
  • Fuel Storage sites


IS-130Z PDF
explosion-proof enclosure
The IS-130Z is using the explosion proof, dust/ignition proof, weather proof and temper resistant enclosure, and the enclosure has the UL, CSA, FM Approved, and ATEX certified.
30 Time optical Zoom

The 30X optical zoom IS-130Z explosion-proof camera is featured with a 22x3.9-85.8mm/ 27x3.5-94.5/30x3.3-99.7mm lens, and can work in low light in less than 0.1 lux f2.0.

We have other different sizes of lenses available.

Smart Temperature Sensor and Heater

The IS-130Z is designed to work in the extreme weather conditions. The built-in smart temperature sensor will automatically kick-in and turn on the built-in heater when the temperature dropped below -20°C.


Key Features
  • HIgh resolution 1/4" CCD Image sersor
  • 30 time Optical Zoom in & zoom out
  • Explosion-proof camera Enclosure
  • working low light with less than 0.1 Lux f2.0
  • Auto revert programmable
  • Pelco protocol compatible
  • control via stand alone dvr system, pc base DVR, or RS-484 ptz controller
  • lowe power consumption (200mA @ DC 12V) for long life
  • wide voltage range: 8VAC~26VAC / 8VDC~36VDC
  • Auto White balance
  • Built-in AGC
  • Metal Lens holder with GNd Isolation


Specification: IS-130Z Explosion-proof Camera
ITEM DESCRIPTION
Sensor 1/4" CCD Image High Resolution Chip
Effective Picture Elements NTSC 768x492 / PAL 752x582 (HxV)
Lens 22x3.9-85mm / 27x3.5-94.5 / 30x3.3-99.7mm
Synchronization Internal
AGC ON 
Lens 3.6mm (other spec. available)
Resolution 480TV Lines
Video Output 1.0Vp-p, 75Ω
White Balance Auto
Gamma 0.45
S/N Ratio >48dB (AGC OFF)
Current Consumption 200mA @ DC 12V
1400mA @ DC 12V with Heater On
Power Supply (Input Voltage) AC 8V~26V 2A  / DC 8V~36V 2A
Operating Temperature  -50°C ~ +60°C
Storage Temperature  -60°C ~ +70°C
Electronics Iris 1/60s~1/100,000s (NTSC), 1/50s~1/110,000s
Light Sensitivity 0.1Lux f2.0


Other Models
Explosion-proof Camera with 3.6mm Lens
Explosion-proof 2MP IP Camera