IP PBX System


Intrinsically Safe WiFi Cordless Handset

TMI would like to introduce a smart IP PBX phone system. The IPBX-100 is an Advanced Hybrid System. It can support both IP SIP phones and Analog phones. The TMI IPBX-100 is a 1U rack mount model for serving up to 100 users. Internally, it supports network access to ISDN BRI, PSTN, GSM/UMTS and VoIP. High performance, stability and compatibility, combined with rich functionality make IPBX-100 perfectly suited for your business communications.

TMI IPBX-100 is the hybrid phone system. It can handle both digital and analog phones. The TMI IPBX-100 is a 1U rack mount model for serving up to 100 users.



Internally, the IPBX-100 supports network access to ISDN BRI, PSTN, GSM/UMTS and VoIP. It provides high performance, stability and compatibility, combined with rich functionality make IPBX-100 perfectly suited for your business applications.



TMI IPBX-100 is the hybrid phone system. It can handle both digital and analog phones. The TMI IPBX-100 is a 1U rack mount model for serving up to 100 users. This is the basic setup without any additional O2, S2, or GSM modules



The IPBX-100 can support PSTN and SIP Trucking. For adding the PSTN truck lines, you have to install the O2 module for FXO connection. Each of the O2 module can support 2 FXO ports for 2 PSTN lines. For SIP trucking, you can subscribe a SIP line for internet, and the cost of the SIP Trucking can be much low cost than the traditional PSTN line. The PSTN line is ideal for when your internet is down, so you still have a PSTN line for backup.



The IPBX-100 is an ideal small PBX system for oil & gas, mining industry, because it advance features and functionality. The IPBX-100 can work with our TMI wireless phone system like the TM-2300, TM-2400, TM-3300 and TM-2200EX. The TM-2300, TM-2400 and TM-3300 are operated in 900MHz frequency and they are using analog signal for connection to the PBX. In this application, we installed 1 O2 module for 2 FXO connection, 2 S2 module for 4 FXS connections. The FXS ports will be connected to Base Stations of TM-2300B and TM-3300B, and the TM-2300R and TM-3300R remote stations will act like the wireless extensions of the PBX. TMI IPBX-100 has the built-in Audio Out for connect to a PA system. TM-2400 system is specially designed for oil & gas industry, and it is a wireless PA system. The TM-2400B base station attached to the Audio Out port of the IPBX-100. When someone called in the Paging Extension, the TM-2400B base station will wirelessly broadcast the audio signal to all the TM-2400R remote stations. A TM-2400B base station can control 10 or more TM-2400R remote stations.



For a typical oil rig site where PSTN or Internet access is very limited or not service at all. The IPBX-100 is compatible to add the GSM module, so you can add the GSM service network in to the PBX system. For some application where the location is very remote, GSM service is not available. You can connect the IPBX-100 to the Satellite phone (VSAT) for voice and data communication.




Key Features
PBX Features
  • Automated Attendant
  • Attend Transfer
  • Blind Transfer
  • Blacklist
  • Call Back
  • Call Detail Records
  • Call Forward
  • Call Parking
  • Call Pickup
  • Call Routing
  • Call Waiting
  • Caller ID
  • Conference
  • Do Not Disturb
  • Follow me
  • Intercom/Zone Intercom
  • Music on Hold
  • Music on Transfer
  • Queue
  • Ring Group
  • Skype Integration (Skype Connect)
  • Speed Dial
  • Voicemail

Advanced Features
  • Direct Inward System Access (DISA)
  • Distinctive Ringtone
  • Mobility Extension
  • Dial by Name
  • One touch recording
  • Phone Provisioning for Cisco, Yealink, Snom, Aastra, Polycom IP Phone
  • QoS (voice quality)
  • Route by Caller ID
  • Spy functions (Normal Spy, Whisper Spy, Barge Spy)
  • Static Route

Fax Features
  • Faxes to email
  • Incoming faxes detected
  • T30, T38 faxes

  • SMS Features

  • Email to SMS
  • SMS to Email

  • Internet Features
  • DHCP server
  • DDNS
  • 1 LAN port (10/100Mbps): Static IP, DHCP client
  • 1 WAN port (10/100Mbps): Static IP, DHCP client, PPPOE
  • 1 USB port (2.0)
  • VLAN: VLAN over LAN, VLAN over WAN Open VPN client


Hardware Specifications
  • 1 LAN port
  • 1 WAN port
  • Up to 16 FXO ports (O2 module based)
  • Up to 16 FXS ports (S2 module based)
  • Up to 8 BRI ports (B2 module based)
  • Up to 8 GSM ports (GSM module based)
  • Up to 8 UMTS ports (UMTS module based)
  • 1 RS232 port
  • 1 Audio Input port
  • 1 Audio Output port
  • LED: Red for FXO/GSM/UMTS, Orange for BRI, Green for FXS


Environmental Specs
  • Size: 340x210x44mm (1U rack-mount)
  • Weight: 2.1kg
  • Power Supply: AC 100~240V, 50~60Hz
  • Maximum Power:60 W
  • Operation Range: 0°to 40°C, 32° to 122°F
  • Storage Range: -20° to 65°C, 4° to 149°F
  • Humidity: 10-90% non-condensing


IPBX-100